Dimension
Technical Details
- Power Supply: 12 V ± 10% (DC)
- Bias-Current: 40mA (DC)
- Max Current: 440mA (DC)
- Temperature range: -20C to + 70C
- Sheet metal thickness from 1.5-2mm (plus powder coating)
- Top mounting screws Tq to 1.0-1.2Nm
- Bottom cap screws Tq to 0.4Nm
Connection
LED Status
Mechanical Installation
CAM LATCH
The swinghandle can be connected to a single or 3-point cam. This allows for the use of round rods with this system to create multi-point locking.
ROD LATCH
The swinghandle drives the gear in the rod latch housing. Flat rods run perpendicular to the door frame where rollers secure behind the frame mounted catch.
OFFSET
The swinghandle drives the gear operating the side-mounted bar system, this is typically used to keep the locking rods outside of the door frame and seal.
Installation for MLR5000KP for Rod Latch
Installation of MLR5000KP for Cam Latch
Product Introduction of MLR5000KP
Item number
MLR5000 KP (125 kHz) for Offset
610-9407.00-00000
MLR5000 KP (125 kHz) for Rod Latch
610-9401.00-00000
MLR5000 KP (125 kHz) for Cam Latch
610-9439.00-00000
MLR5000 KP (13.36 MHz) for Offset
610-9407.00-00001
MLR5000 KP (13.56 MHz) for Rod Latch
610-9401.00-00001
MLR5000 KP (13.56 MHz) for Cam Latch
610-9439.00-00001
Delivery
Swinghandle