Dimension
Technical Details
- Power Supply: 12 V ± 10% (DC)
- Bias-Current: 40mA (DC)
- Max Current: 440mA (DC)
- Temperature range: -20C to + 70C
- Sheet metal thickness from 1.5-2mm (plus powder coating)
- Top mounting screws Tq to 1.0-1.2Nm
- Bottom cap screws Tq to 0.4Nm
Connection
LED Status
Mechanical Installation
CAM LATCH
The swinghandle can be connected to a single or 3-point cam. This allows for the use of round rods with this system to create multi-point locking.
ROD LATCH
The swinghandle drives the gear in the rod latch housing. Flat rods run perpendicular to the door frame where rollers secure behind the frame mounted catch.
OFFSET
The swinghandle drives the gear operating the side-mounted bar system, this is typically used to keep the locking rods outside of the door frame and seal.
Installation MLR5000 for Rod Latch
Installation MLR5000 for Cam Latch
Product Introduction MLR5000
Item number
MLR5000 (125 kHz) for Offset
610-9607.00-00000
MLR5000 (125 kHz) for Rod Latch
610-9601.00-00000
MLR5000 (125 kHz) for Cam Latch
610-9639.00-00000
MLR5000 (125 kHz) for Rod Latch (Rittal)
610-9645.00-00000
MLR5000 (13.56 MHz) for Offset
610-9607.00-11356
MLR5000 (13.56 MHz) for Rod Latch
610-9601.00-11356
MLR5000 (13.56 MHz) for Cam Latch
610-9639.00-11356
MLR5000 (13.56 MHz) for Rod Latch (Rittal)
610-9645.00-11356
Delivery
Swinghandle